eMMC
USB
Wacom
AWG
FFC
SD
NXP
SDHC
Linux
XX
black screws
No matching tags
Hobbitboard
/etc
SD
No matching tags
I chose an external card because I want to be able to swap them easily; it also makes backups faster. The aluminum back panel is held to the plastic case with glue. Next, there is a magnesium chassis screwed to the plastic case. Finally, the logic board can be removed. Underneath the logic board is a plastic tape, a The bottom-right seemed like an appropriate placement for the card The stock rM kernel doesn't enable the SDHC1 slot, which is how these The rM is a mostly-vanilla i.MX6 board (many share similaries, including the Hobbitboard). Copy the artifacts to the rM's /boot directory: arch/arm/boot/dts/zero-gravitas.dtb and arch/arm/boot/zImage.
As said here by